About Us
Contact us
Delivery and payment
Imagine that you no longer have to endure pain until it goes away on its own. You decide when and how to relieve your condition. This is the essence of ENART – giving people back control and freedom in a safe and conscious way.
Dr. Linskyi has been working with ENART biofeedback devices for many years. His experience shows one simple thing: the operating rules for use are not mere formalities outlined in the instructions. They are a guarantee that the procedures will be gentle, predictable, and effective.
Why understanding the technology is also part of self-care
Many people rush: they turn it on and start right away. But ENART is like an instrument in the hands of a musician. To unlock its potential, you need to treat it with care.
A few minutes of your time and perseverance today will turn into hours of stress-free achievement tomorrow.
Any challenges you face and overcome are a guarantee that your path to better health will be reliable and sustainable.
The ENART 907 device does not have a display. The ENART 911 model has a display.
However, the operating rules are equally important for both models.
Four habits that turn the device into a system: at first glance, they come across as technical details but, in reality, they are your insurance against failures and disappointments.
1) Replacing the batteries
Regular AA batteries (disposable or rechargeable) are used. After installing new batteries, always reset the residual voltage:
– Press the buttons “On” and “-” simultaneously
– Release the button “On” first, then the button “-“
– The device will beep and the LEDs will light up, indicating that the residual voltage has been released.
Dr. Linskyi’s patient reported that the device seemed to stop working after replacing the batteries, but this was because she hadn’t reset it.
One minute later, when she did the rest, the device was working again.
2) Keep away from radiation sources.
Routers, powerful speakers, and powerful electrical appliances can create interference. For an accurate reading, choose a quiet location with no background noise.
3) Remote Electrodes
Always connect or disconnect remote electrodes with the device turned off. This protects both the electronics and your safety. The connection will be stable and the readings accurate.
4) Care after each session – 30 seconds
Wipe the electrodes and device casing with a cotton swab soaked in 70% alcohol solution (if unavailable, 96% alcohol solution can be used).
A solution with 70% alcohol is best for disinfection, as it more effectively destroys the membranes of bacteria and viruses.
A 96% solution can also be used, but it is less effective because it evaporates more quickly and penetrates microcracks less efficiently.
It’s worth noting that, according to research, when the device is turned on, an electric field is created on the electrodes that destroys harmful microorganisms.
However, small fragments of skin, etc., may still remain. Gentle cleaning protects you, the device, and the signal quality.
“I’ve been using ENART for over twenty years. These simple rules aren’t a formality, but a way to assure patients that the device is functioning correctly and that they can receive reliable results. Read the manual, follow the basic steps, and you’ll be more than satisfied with how ENART works“, says Dr. Linskyi.
This method teaches you to listen to your body, and the ENART device makes this dialogue precise and understandable.
