|
ENART 801-V5 is a biofeedback device for professional and individual/family use.
• Furnished with:
- LCD–shows the activated stimulation modes, settings and measurement results;
- Display backlight ensures readability at poor illumination;
- Graphic indication of battery discharge;
- Stopwatch – counts the time of treatment at each particular skin contact;
- Timer – adjustable time of treatment: Max 5.0 min, Min 0.5 min. it has the OFF option available.
- Metal casing – makes the device robust and more reliable;
- Leather holster – for storing and transporting the device.
• Has four basic stimulation modes:
1. ENART DIAGNOST = Diagnostic/Individually Dosed Stimulation mode.
It is used both when repositioning the device between the skin points within the area under investigation during diagnostics, and when holding the device in a fixed position (without moving it) on the skin in the treatment area to provide individual-specific dosing according to biofeedback responses from the body.
A possibility to change:
- Energy value from 0% to 99% (INTENS 0% … 99%) and Frequency of the output pulse within the range of 20Hz – 200Hz (FREQ CON 20Hz … 200Hz);
- Audio and light signalling of “Dose” (Dose 1) and “0” (Dose 2).
2. ENART CONSTANT = General Purpose Continuous Stimulation mode.
It is used when moving the device smoothly over the skin surface to treat large areas and to determine any asymmetries (differences) that appear on the skin during or after the session and indicate the need for additional specific treatment.
Can also be used by holding the device still (without moving it) in the treatment area.
The possibility to change:
- Energy value from 0% to 99%;
- Frequency within the range of 1Hz – 200Hz;
- Frequency Deviation (FREQ DEV +/- %) from 0% to 100%, Frequency - Deviation Period (FREQ PER 0,5 min) from 0,5 min to 5,0 min (0,5 min at a time), and functions Energy High / Energy Low to use on children and sensitive areas.
3. ENART INTERVAL = Interval Stimulation mode.
It is used when the device kept still (without moving its position) on the skin in the treatment area.
Applied locally to treat mainly the atonic (weakened) internal organs, musculo-skeletal disorders, both chronic and acute, and to stimulate muscle contraction.
The possibility to change:
- Energy value from 0% to 99%;
- Frequency within the range of 1Hz – 200Hz;
- Stimulation/Non-stimulation ratio adjustable 0,5 sec at a time from 0,5:1 (Stimul 0,5 s) to 5:1 seconds (Stimul 5,0 s), default is 1:1 sec (Stimul 1,0 s);
- Timer setting adjustable 0,5 min at a time from 5.0 min (Timer 5,0 min) to 0,5 min (Timer 0,5 min) with OFF option available (Timer OFF);
- functions Energy High /to Energy Low to use on children and sensitive areas.
4. ENART ALTERNAT = Alternative (Variable) Stimulation mode.
It is used when the device kept still (without moving it) on the skin in the treatment area.
Automatically varies the 100Hz default frequency within the frequency range of 10Hz – 200Hz over a two minute period, thus providing a ‘run-through’ stimulation that most effectively ‘triggers’ a specific body area to achieve fast healing.
The possibility to change:
- Energy value from 0% to 99%;
- Frequency within the range of 1Hz – 200Hz;
- Frequency Deviation from 100% to 0%;
- Timer setting is adjustable 0.5 min at a time from 0.5 min to 5.0 min (default 2.0 min), without OFF option;
- Energy High/Energy Low functions to use on children and sensitive areas.
• In all Modes, it is possible to connect additional remote electrodes (probes) that considerably enhance the capabilities of the device, improve its therapeutic effects and assist the user in the treatment of hard-to-reach areas.
• Operates from two 1.5V AA-size batteries disposable or rechargeable.
• Dimensions: 198x55x45 mm.
• Weight: 360 gr.
| 
